Ditch Witch 8500 - Manual (Page 65)

Service - 62
8500 Tracking System Operator’s Manual
General Care
CMW
General Care
Under normal operating conditions, tracking system components need only minor maintenance. Following
these care instructions can ensure longer equipment life:
• Do not drop the equipment.
• Do not expose the equipment to high heat (such as in the rear window of a vehicle).
• Clean equipment with a damp cloth and mild soap. Never use scouring powder.
• Do not immerse in any liquid.
• Inspect housing daily for cracks or other damage. If housing is damaged, contact your equipment
dealer for replacement.
• Do not mix new and used batteries.
• Remove battery if storing for an extended period.
As Needed
Tracker
Change Alkaline Batteries
Use six C-cell alkaline or rechargeable Ni-MH
batteries in tracker.
1. Remove battery caps.
2. Insert batteries as shown.
3. Install and tighten battery caps.
4. Check operation.
Location Task Notes
Tracker Change alkaline batteries 6 “C” alkaline
Charge/change Li-ion battery pack 1 Li-ion battery pack
Display (in Case) Change batteries 6 “C” alkaline
Beacon Change batteries 1 Lithium or Power Stick
IMPORTANT: Do not mix new and used
batteries. Do not mix battery brands or
types.