Procedure, Rt30 operator’s manual – Ditch Witch RT30 User Manual

Page 53

Advertising
background image

Transport - 52

RT30 Operator’s Manual

Tow

CMW

Tow

Under normal conditions, tractor should not be towed. If tractor becomes disabled and towing is

necessary:

Do not tow for more than 200 yd (180 m).

Tow at less than 1 mph (1.6 km/h).

Use maximum towing force of 1.5 times unit weight.

Procedure

1. Attach tow line to all available tiedown

points facing towing vehicle.

2. Bypass hydraulic system.

Remove tunnel cover and loosen bypass

valve (shown) two turns. Valve is on top of

front pump.

3. Fasten seat belt.
4. Disengage parking brake.
5. Check that ground drive and attachment

speed/direction controls are in neutral

position.

Incorrect procedures could result in death, injury, or property damage.

Learn to use equipment correctly.

NOTICE:

When bypass valve is open, unit

has no brakes.

Advertising