Ditch Witch RT30 - Manual (Page 76)

RT30 Operator’s Manual
Service - 75
10 Hour
Check Restraint Bar Position
Check restraint bar position every 10 hours, or
anytime the digging chain is adjusted or replaced.
The restraint bar is properly positioned when the
end of bar extends between the center of the tail
roller/sprocket and the end of the digging chain.
Check Trench Cleaner Position
Check trench cleaner position every 10 hours, or
anytime the digging chain is adjusted or replaced.
The trench cleaner is properly positioned when
there is 3-4 in (76-102 mm) between the digging
teeth and the inside of the trench cleaner shoe
(A).