Plow – Ditch Witch 100SX User Manual
Page 26
26
100sx - OPERATION
PLOW
26
100sx - OPERATION
PLOW
PLOW
Incorrect procedures could result
in death, injury, or property damage. Learn to use
equipment correctly.
NOTICE: Keep hands on handlebars while
operating plow.
1.
Drive to starting point.
2.
Follow blade attachment procedure.
3.
Feed cable in cable chute or insert material in pulling grip.
4.
Open fuel shutoff valve.
5.
Tilt machine back onto blade.
6.
Start engine and run at high idle.
7.
Engage plow control.
8.
Lower plow blade to desired depth by pushing down on
handlebars until skid-plate touches ground.
9.
Slowly move speed/direction control forward to begin
plowing.
10. To turn, push down on handlebars to break traction and pivot
machine. Concentrate weight on handlebar to outside of turn.
11. When finished plowing, return speed/direction control to
neutral position, lift handlebars to clear blade from ground,
disengage plow control, and and move throttle to low idle.
12. Follow shutdown procedure.
13. Remove cable from cable chute and follow blade removal
procedure.
PLOW
Incorrect procedures could result
in death, injury, or property damage. Learn to use
equipment correctly.
NOTICE: Keep hands on handlebars while
operating plow.
1.
Drive to starting point.
2.
Follow blade attachment procedure.
3.
Feed cable in cable chute or insert material in pulling grip.
4.
Open fuel shutoff valve.
5.
Tilt machine back onto blade.
6.
Start engine and run at high idle.
7.
Engage plow control.
8.
Lower plow blade to desired depth by pushing down on
handlebars until skid-plate touches ground.
9.
Slowly move speed/direction control forward to begin
plowing.
10. To turn, push down on handlebars to break traction and pivot
machine. Concentrate weight on handlebar to outside of turn.
11. When finished plowing, return speed/direction control to
neutral position, lift handlebars to clear blade from ground,
disengage plow control, and and move throttle to low idle.
12. Follow shutdown procedure.
13. Remove cable from cable chute and follow blade removal
procedure.