Ditch Witch 100SX - Manual (Page 29)

100sx - TRANSPORTATION 29
LOAD
100sx - TRANSPORTATION 29
LOAD
LOAD
1. Follow blade removal procedure.
2. Start machine following instructions in OPERATION.
3. Move throttle to half open.
EMERGENCY SHUTDOWN: Turn ignition switch to off position.
4. Align machine with ramps or trailer, boom first.
5. Guide machine onto trailer.
6. When tie-down position is reached, move speed/direction
control to neutral position.
7. Chain through loop on weight assembly and tightly attach
chain tie-down points on bed of trailer or vehicle.
For machines with serial numbers below 4R0376, chain
across weight assembly.
8. Move speed/direction control to reverse position.
9. Reverse machine to tighten front chain.
10. Follow shutdown procedure in OPERATION.
11. Place chain through slots below control console, attach chain
to tie-down points on bed of trailer or vehicle and tighten
chain with binder.
LOAD
1. Follow blade removal procedure.
2. Start machine following instructions in OPERATION.
3. Move throttle to half open.
EMERGENCY SHUTDOWN: Turn ignition switch to off position.
4. Align machine with ramps or trailer, boom first.
5. Guide machine onto trailer.
6. When tie-down position is reached, move speed/direction
control to neutral position.
7. Chain through loop on weight assembly and tightly attach
chain tie-down points on bed of trailer or vehicle.
For machines with serial numbers below 4R0376, chain
across weight assembly.
8. Move speed/direction control to reverse position.
9. Reverse machine to tighten front chain.
10. Follow shutdown procedure in OPERATION.
11. Place chain through slots below control console, attach chain
to tie-down points on bed of trailer or vehicle and tighten
chain with binder.