EarthQuake CS3814B User Manual
Page 4
4
Operator's Manual
CS3814B, CS4116B Chainsaws
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5
General Safety Rules
•
Read, understand, and follow all instructions on the
machine and in the manual(s). Be thoroughly familiar
with the controls and the proper use of the machine
before starting.
•
Use this equipment for its intended purpose only.
•
Familiarize yourself with all of the safety and operat-
ing decals on this equipment and on any of its attach-
ments or accessories.
•
Do not put hands or feet near or under rotating parts.
•
Only allow responsible individuals who are familiar
with the instructions to operate the machine. Do not
allow children to operate this machine. Do not allow
adults to operate the machine without proper instruc-
tion.
•
Thoroughly inspect the area where the machine is to
be used and remove all foreign objects. Your equip-
ment can propel small objects at high speed causing
personal injury or property damage. Stay away from
breakable objects, such as house windows, automo-
biles, greenhouses, etc.
•
When operating the machine, wear appropriate cloth-
ing such as a long-sleeved shirt or jacket. Also wear
long trousers or slacks. Do not wear shorts. Never
wear sandals, sneakers, or open shoes, and never
operate the machine with bare feet.
•
Do not wear loose clothing or jewelry. They can get
caught in moving parts. Always keep hands, feet, hair
and loose clothing away from any moving parts on
engine and machine.
•
Always wear safety goggles or safety glasses with side
shields when operating the machine to protect your
eyes from foreign objects which can be thrown from
the unit. Always wear a protective hearing device.
•
Always wear work gloves and sturdy footwear. Wear
footwear that will improve footing on slippery sur-
faces. Leather work shoes or short boots work well for
most people. These will protect the operator’s ankles
and shins from small sticks, splinters, and other debris.
•
It is advisable to wear protective headgear to prevent
the possibility of being struck by small flying particles,
or being struck by low hanging branches, twigs, or
other objects which may be unnoticed by the opera-
tor.
•
Do not operate the machine without proper guards or
other safety protective devices in place.
•
See manufacturer’s instructions for proper operation
and installation of accessories. Only use accessories
approved by the manufacturer.
•
Operate only in daylight or good artificial light.
•
Do not operate product when fatigued or under the
influence of alcohol, drugs or other medication which
can cause drowsiness or affect your ability to operate
this machine safely.
•
Never operate machine in wet grass. Always be sure
of your footing; keep a firm hold on the handle and
walk; never run.
•
Watch for traffic whenever you are operating near, or
when
crossing roads.
•
If the equipment should start to vibrate abnormally,
stop the engine (motor), disconnect the spark plug
wire and prevent it from touching the spark plug.
Check immediately for cause. Vibration is generally a
warning of trouble. If the noise or vibrations of the
machine increase, stop immediately and perform an
inspection.
•
Never leave the machine unattended when the en-
gine is running. Remove the wire from the spark plug.
•
Regularly inspect the machine. Make sure parts are
not bent, damaged or loose. Keep all screws, nuts and
bolts tight.
•
Temperature of muffler and nearby areas may exceed
150° F (65° C). Allow muffler and engine areas to cool
before touching.
•
Do not transport the machine from one place to an-
other with the engine running.
•
Prolonged exposure to noise and vibration from gasoline
engine-powered equipment should be avoided. Take
intermittent breaks and/or wear ear protection from
engine noise as well as heavy work gloves to reduce
vibration in the hands.
•
When moving the packaged machine, always do so
with a partner.
•
Check local regulations for age restrictions on use of
this machine.
Product-Specific Safety Rules
•
After striking a foreign object, stop the engine.
Remove the wire from the spark plug. Inspect the
chainsaw for damage. If damaged, repair before start-
ing and operating the chainsaw.
•
The cutting chain of the chainsaw should not rotate
when the engine is idling. If it does rotate when en-
gine is idling, contact Earthquake for instructions.