East Coast Supercharging ECS Paxton SC1500 '14 C7 Supercharger Kit User Manual

Page 37

Advertising
background image

EASTCOASTSUPERCHARGING.COM

n

609-752-0321

n

37

n

j

n

Next you will need to install the two side air deflectors supplied in the kit. Begin by installing the air

deflector using the first 7mm bolt that holds the intercooler shroud, leaving the bolt loose. Make sure

the air deflector angle matches up, as shown in Picture 1. Tighten 7mm bolt and proceed to drill a 1/4

inch hole through the existing mounting hole on the deflector, as shown in Picture 2.

Picture 1

j

Picture 2

j

n

To secure the air deflector, insert the supplied push-in plastic retainer supplied with the kit, as shown

in Picture 3. Repeat procedure on opposite side. Once installed, the air deflector assembly should look

like Picture 4, creating a “Ram Air” effect for the intercooler.

Picture 3

Picture 4

Advertising