Pcv system re-routing – East Coast Supercharging ECS Paxton SC1500 '14 C7 Supercharger Kit User Manual

Page 40

Advertising
background image

EASTCOASTSUPERCHARGING.COM

n

609-752-0321

n

40

n

n

PCV System Re-routing:

On both valve covers the breather lines are connected to the valve

covers with GM QC fittings that contain a check-ball that can and will become stuck not allowing for

proper crankcase ventilation, and one must be removed (passenger side) and the other replaced with the

new supplied QC fitting. Follow the steps below to properly remove the check ball from the passenger

side valve cover fitting and re-install.

n

Locate the passenger side valve cover breather. Disconnect passenger side valve cover QC fitting

and locate the small black retainer inside as shown above. Use a small pick “Hook” and pull the ball

retainer as shown in the two pictures below. The check ball should fall right out allowing for proper

crankcase ventilation. Discard of retainer and check ball and install QC fitting back on passenger side

valve cover.

Advertising