East Coast Supercharging ECS Stage 1 2003+ Fuel System - Manual (Page 4)

Reinsert wire tool into backer plate
through return opening or one of the
screw holes to support backer plate
holding it against the back of the tank.
Begin threading one of the provided allen bolts
with o-ring through pick up and into backer
plate.
Install second allen bolt (with o-ring) and
snug down. Torque bots down to 12
ft/pounds.
Install the supplied 6AN block off cap on the upper
fitting on the fuel block. (this is set up as a fuel
return should you ever upgrade your fuel system)