Example, Reverse( ) built-in function, Syntax – Echelon Neuron C User Manual
Page 147
Neuron C Reference Guide
127
status_version_number
The version number, which reflects the Neuron firmware
version.
status_error_log
The most recent error logged by the Neuron firmware or
application. A value of 0 indicates no error. An error in
the range of 1 to 127 is an application error and is unique
to the application. An error in the range of 128 to 255 is a
system error (system errors are documented in the
Neuron Tools Errors Guide
). The system errors are also
available in the <nm_err.h> include file.
status_model_number
The model number of the Neuron Chip or Smart
Transceiver. The value for this byte is one of the
following:
0x00
for all Neuron 3150 Chips, and
for an FT 3150 Smart Transceiver
0x01
for a PL 3150 Smart Transceiver
0x08
for Neuron 3120 Chip
0x09
for Neuron 3120E1 Chip
0x0A
for Neuron 3120E2 Chip
0x0B
for Neuron 3120E3 Chip
0x0C
for Neuron 3120A20 Chip
0x0D
for Neuron 3120E5 Chip
0x0E
for Neuron 3120E4 Chip
or an FT 3120 Smart Transceiver
0x0F
for a PL 3120 Smart Transceiver
0x11
for a PL 3170 Smart Transceiver
0x20
for an FT 5000 Smart Transceiver
0x21
for a Neuron 5000 Processor
Example
For an example of the use of this function, see Chapter 7,
Additional Features,
of
the
Neuron C Programmer's Guide
.
reverse( )
Built-in Function
The reverse( ) built-in function reverses the bits in
a
.
Syntax
unsigned int reverse (unsigned int
a
);
Example
void f(void)
{
int
value;
...
value = 0xE3;
...