Echelon Neuron C - Manual (Page 243)

Neuron C Reference Guide 223
eeprom_memcpy
fblock_director
get_fblock_count | get_nv_count
get_tick_count
high_byte
interrupt_control
io_change_init
io_in | io_in_ready | io_in_request
io_out | io_out_ready | io_out_request
io_preserve_input
io_select
io_set_baud | io_set_clock | io_set_direction
io_set_terminal_count
is_bound
low_byte
make_long
max
memcpy | memset
min
nv_table_index
poll
propagate
sci_abort | sci_get_error
sleep
spi_abort | spi_get_error
swap_bytes
touch_bit | touch_byte | touch_first
touch_next | touch_reset
touch_byte_spu | touch_read_spu
touch_read_spu | touch_write_spu
touch_reset_spu
msg-call-kwd :
one of msg_alloc | msg_alloc_priority
msg_cancel | msg_free | msg_receive
msg_send | resp_alloc | resp_cancel
resp_free | resp_receive | resp_send
Implementation Limits
The contents of the standard include file <limits.h> are given below.
#define CHAR_BIT 8
#define CHAR_MAX 255
#define CHAR_MIN 0
#define SCHAR_MAX 127
#define SCHAR_MIN ((signed char)(-128))
#define UCHAR_MAX 255
#define SHRT_MAX 127
#define SHRT_MIN ((signed short)(-128))
#define USHRT_MAX 255