Echelon FT 5000 EVB - Manual (Page 33)

FT 5000 EVB Hardware Guide 25
Gizmo 5V or 3.3V Power Select (JP204)
This jumper connects 5V or 3.3V power to the Gizmo connector (P201, pin 19) on the FT 5000 EVB.
You can use the Gizmo connector for the external use of the 12 I/O pins of the FT 5000 Smart
Transceiver and the power supply (5V or 3.3V). The 5V and 3.3V supplies are disconnected from
JP201 by default as illustrated in the following figure (the shunt hangs off pin 2):
To connect 5V power to the Gizmo connector (P201, pin 19), connect the shunt between pins 1 and 2
as demonstrated in the following figure:
To connect 3.3V power to the Gizmo connector (P201, pin 19), connect the shunt between pins 2 and 3
as demonstrated in the following figure:
Gizmo 3.3V Power (JP205)
This jumper connects 3.3V power to the Gizmo connector (P201, pin 17) on the FT 5000 EVB. The
3.3V jumper is disconnected by default as illustrated in the following figure (the shunt hangs off pin
1):