Echelon NodeBuilder FX/PL Examples - Manual (Page 14)

6 Using the NodeBuilder FX/PL Example
10. Select the Network Attached check box. In the Network Interface Name property select the
network interface to be used for communication between the LonMaker tool and the LTM-10A
Platform over the L
ON W ORKS channel. Click Next.
You can use the U20 USB Network Interface included with the NodeBuilder FX/PL Development
Tool, or you can use another network interface such as an i.LON SmartServer or an i.LON 100 e3
Internet Server. If you are using the U20 USB Network Interface included with the NodeBuilder
FX/PL Development Tool and you have not installed any other network interfaces on your
computer, select LON1.
For more information on installing and configuring the U20 USB Network Interface, and on using
it to attach your computer to a network channel, see the L
ON W ORKS USB Network Interface User’s
Guide.
11. The Management Mode window opens.