Echelon NodeBuilder FX/PL Examples - Manual (Page 20)

12 Using the NodeBuilder FX/PL Example
so that they are all selected, right-click one of the selected functional block shapes, and click
Browse on the shortcut menu.
2. The LonMaker Browser opens. It displays the three selected functional blocks (Button 1, RTC,
and LED 1) and the network variables and configuration properties within each functional block.
Note that you can only write values to the input network variables (blue) and writable
configuration properties (green).
3. Click the Monitor All button ( ) on the toolbar to start polling all values.
4. Click anywhere in the nviTimeSet row and enter the current time in the Value box at the top of
the Browser in the following format: mm/dd/yy hh:mm:ss. The RTC.nvoTimeDate network
variable is set to this time and starts.