Electrocompaniet AW100DMB User Manual
Page 4
Unpacking the amplifier:
Immediately upon receipt of the amplifier, inspect the carton for possible damage
during shipment. If the carton is visibly damaged, a claim must be filed with the car-
rier as soon as possible.
Unpack the unit carefully, and please do remember to save all packaging materials
for future shipment. The carton and packaging have been designed to offer the
safest possible protection when transporting your amplifier.
The content of the carton is as follows:
1 pcs Electrocompaniet Ampliwire 100 DMB
1 pcs AC power cord
1 Owners Manual
1 pcs Spare fuse, 5.0 AT slow-blow 5x20mm (120V AC)
2.5 AT slow-blow 5x20mm (220V AC)
The actual spare fuse is located inside the AC 3 pin receptacle.
Connecting the AW 100 DMB
Connecting to mains
Check that mains voltage printed on the rear panel of the amplifier corresponds with
the line voltage in the territory were you intend to use your amplifier.
How to avoid damages
A good operating practice is to turn off all equipment before any connections or
disconnections are made. Do not under any circumstances connect or disconnect
equipment when power is turned on. If you insist on connecting or disconnecting
while power is turned on, you should be aware that the design of the RCA plug
generates a large transient when inserting the plug. This could damage both the
speakers and the amplifier.
The rear panel
The rear panel of the Ampliwire AW 100 DMB is equipped with two sets of RCA input
sockets, marked + and -, and one XLR female socket, for each channel.