Electrocompaniet ECI 5 MKII - Manual (Page 2)

2
Unpacking the ECI 5
Immediately upon receipt of the ECI 5 MKII , inspect the carton for pos-
sible damage during shipment.
The carton and packaging have been designed to provide the safest
possible protection for transport of your integrated amplifier. Unpack the
unit carefully. Save all packaging materials for future shipment.
The contents of the carton
• 1 pcs Electrocompaniet ECI 5 MKII integrated amplifier.
• 1 pcs AC main cord.
• 1 pcs spare main fuse (located in the fuse drawer).
• 1 pcs inspection card.
• 1 pcs remote control.
• 2 pcs batteries.
Set up procedure
Before connecting the ECI 5 MKII to the mains, check that the main volt-
age indicated on the rear panel corresponds to the line voltage in the
territory were you intend to use the unit.
How to avoid damages
Do not under any circumstances connect or disconnect equipment when
power is turned on.The design of the RCA plug generates a huge tran-
sient when inserted. Connecting or disconnecting equipment with the
power on can result in severe damage to both speakers and amplifier.
How to avoid noise problems
The ECI 5 MKII contains delicate circuits that are sensitive to magnetic
strayfields. The unit should not be placed near mains transformers, TV
sets etc. Care should also be taken regarding placement of the intercon-
nect cables. Do not run interconnect cables in parallel with maincords or
speaker cables. Keep interconnect cables as short as possible.
How to avoid possible antenna problems
In some set-ups hum may occur when you connect the radio, VCR or TV
to your system.The problem is caused by DC voltage coming from your
antenna. Please contact your cable network operator.
How to connect your system
Please read this page carefully and follow diagram 1, page 14.