Electrocompaniet ECD1 V1 User Manual
Page 6
6
Technical Specification ECD 1
The following technical data were measured on randomized test objects and are
typical data.
All measurements are made at 120V / 240V // 50Hz / 60Hz
Analog stage
Output level (unbalanced).............................1,6 V
Output level (balanced).............................
.....3,2 V
Gain (unbalanced).........................................1.6 X (4 dB)
Gain (balanced).............................................
..3.2 X (10 dB)
Maximum output (balanced)..........................> 14 V RMS
THD (1 V out, 1 kHz)........................................< 0.002 %
Channel separation ( 1 V out, 1 kHz).........
..> 90 dB
Equivalent input noise....................................4 uV
Output impedance..........................................100 Ohm
Analog filter (-3 dB)....................................
......75 kHz
Digital stage
Dig.inputs..................................................
.......XLR-AES/EBU, RCA,
OPTICAL TOSLINK
Dig.outputs...................................................... .RCA, OPTICAL TOSLINK
Dynamic range................................................100 dB
Signal to noise................................................100 dB
THD.............................................................
.....-100 dB
Frequency response.................................
.....20 Hz - 20 kHz
Input / Output impedance (fixed)............
......75 Ohm
Sampling frequency in...............................
....32 - 48 kHz
Power consume.........................................
.....15 W
Dimensions
Width
483mm
(19”)
Depth
255mm
(10”)
Height
83mm
(3.2”)
Weight
5kg
(11lbs)
The manufacturer reserves the right to alter these specifications without further notice