Elenco Upgrade Kit SC300 to SC750 - Manual (Page 40)

-39-
OBJECTIVE: To construct a flashing display for the capital letter C.
Connect segments A, D, E & F to the circuit. Turn on the switch (S1), the display
flashes and the whistle chip (WC) buzzes on and off.
Automatic Display Capital Letter “C”
Project #411
OBJECTIVE: To construct a flashing display for the capital letter E.
Use the circuit from project #411. Connect A, D, E, F, & G to the circuit. Turn on the
switch (S1), the display flashes and the whistle chip (WC) buzzes on and off.
Automatic Display Capital Letter “E”
Project #412
Project #413
OBJECTIVE: To construct a flashing display for the capital letter F.
Use the circuit from project #411. Connect A, E, F,
& G to the circuit. Turn on the switch (S1), the
display flashes and the whistle chip (WC) buzzes
on and off.
Automatic Display
Capital Letter “F”
Project #414
OBJECTIVE: To construct a flashing display for the capital letter H.
Use the circuit from project #411. Connect B, C, E
, F, & G to the circuit. Turn on the switch (S1), the
display flashes and the whistle chip (WC) buzzes
on and off.
Automatic Display
Capital Letter “H”
Project #415
OBJECTIVE: To construct a flashing display for the capital letter P.
Use the circuit from project #411. Connect A, B, E,
F, & G to the circuit. Turn on the switch (S1), the
display flashes and the whistle chip (WC) buzzes
on and off.
Automatic Display
Capital Letter “P”
Project #416
OBJECTIVE: To construct a flashing display for the capital letter S.
Use the circuit from project #411. Connect A, F, G,
C, & D to the circuit. Turn on the switch (S1), the
display flashes and the whistle chip (WC) buzzes
on and off.
Automatic Display
Capital Letter “S”
Project #417
OBJECTIVE: To construct a flashing display for the capital letter U.
Use the circuit from project #411. Connect B, C, D,
E, & F to the circuit. Turn on the switch (S1), the
display flashes and the whistle chip (WC) buzzes
on and off.
Automatic Display
Capital Letter “U”
Project #418
OBJECTIVE: To construct a flashing display for the capital letter L.
Use the circuit from project #411. Connect D, E, &
F to the circuit. Turn on the switch (S1), the display
flashes and the whistle chip (WC) buzzes on and
off.
Automatic Display
Capital Letter “L”
To learn more about how circuits work, visit www.snapcircuits.net or page 62 to find out about our Student Guides.