Elenco Diode/Transistor Tester Kit - Manual (Page 3)

-2-
PARTS VERIFICATION
Before beginning the assembly process, familiarize yourself with the components and this instruction book.
Verify that all of the parts are present. This is best done by checking off the parts in the parts list.
RESISTORS CAPACITOR SEMICONDUCTORS
Electrolytic
(radial)
Diode
100kΩ Potentiometer Transistor LED
Knob
MISCELLANEOUS
Switch DPDT
PC Board
Case top
Case bottom
Screws
2.8 x 8mm
M3 x 0.5 x 5mm
7mm
Nuts Washers
Flat
8 x 14mm
Lockwasher 5/16”
Rubber foot
Spacer LED
Label
Lead-free solder
Carbon film
8-pin Socket 555 IC Discap
Battery snap
Transistor
socket
Push button switch with
1/4” nut and washer
Alligator clip
Wires Double-sided tape Battery clip