Elenco 3 1/2 Digit with Temperature - Manual (Page 11)

Table 5. LCD Display Symbols (continued)
4. Power On Option
To release the Auto Power Off function, press and hold the
SELECT button when the meter is on.
5. Auto Power Off
When the meter has been on for 30 minutes without any action from
the user, the meter will automatically switch to the standby mode.
To bring back the display, turn the rotary switch to a different
position, push any button, or restart the meter.
6. Measurement Range
A measurement range determines the maximum measurement
value. Most of the functions of the meter have more than one range.
1. It is important to select the correct range
• If the range is too small, “OL” shows on the display for
overload.
• If the range is too large, the value of the reading will be very
small with less resolution.
2. Auto range and manual range options
• In the auto range mode, the meter automatically selects the
best range for the input detected.
• In the auto range mode, press the RANGE button to enter the
manual range and select the desired range.
-11-
Sequ. No. Symbol Description
13 O C O F
Temperature units
(
O C not used on this meter)
14 % Percent symbol
15
mV / V
nF /
µµF
mA / A
Voltage units
Capacitance units
Current units
16 Overload