Elenco DataCom Tester Kit - Manual (Page 15)

-14-
ASSEMBLE THE FOLLOWING COMPONENTS TO THE PC BOARD (cont.)
Spacer
(see Figure M)
D9 - LED
D10 - LED
D11 - LED
D12 - LED
D13 - LED
D14 - LED
D15 - LED
D16 - LED
(see Figure N)
Figure M
Mount the spacer to the PC board as shown.
Figure N
Mount the LEDs onto the spacer as shown. Note the flat
side of the LED in relation to the marking on the PC
board. Solder and cut off the excess leads.
Spacer
(see Figure M)
D1 - LED
D2 - LED
D3 - LED
D4 - LED
D5 - LED
D6 - LED
D7 - LED
D8 - LED
(see Figure N)