Final assembly – Elenco Same as XP720 in Kit Form User Manual
Page 13
Advertising
-12-
FINAL ASSEMBLY
r Fasten the heat sink to the chassis with two 6 x 3/8” black pan head screws, as shown in Figure M.
r Fit the cover onto the chassis. Fasten in place with two 6 x 3/8” black truss head screws on each side, as
shown in Figure M.
Bottom View
Figure M
6 x 3/8” Pan
Head Screws
6 x 3/8” Truss
Head Screws
6 x 3/8” Truss
Head Screws
Advertising