Elenco Bigshot Camera - Manual (Page 12)

10 11
Take the LED flash module and
insert it into the PCB module. The
flash module can be inserted in only
one orientation. Make sure that you
match and align the tabs on the
flash module with the notches on
the PCB module (see blue and
purple boxes), before pushing the
flash module into the PCB module.
The wrist strap has a tiny loop and
a large loop. Squeeze the tiny loop
together and slide it through the
eyelet on the side of the camera
body.
Pass the big loop through the little
loop as shown on the left.
Build
E1. Turn the LED flash module clockwise
to lock it into the PCB module.
E2.
E3. E4.
Then, pull on the big loop to tighten
the strap.
E5. Congratulations. You’re done! E6.
E LED Flash
Learn about the LED flash
http://www.bigshotcamera.com/learn/led-flash/index