EMM Labs XDS1 - Manual (Page 20)

020 Appendix A - Serial Remote Control (RS232)
Commands to the XDS1 V2 (cont`d)
pol Toggles polarity inversion performed in the digital domain.
src Toggles between CD/SACD playback and all digital inputs.
dsc Selects CD/SACD Player
aes Selects the AES digital input
tos Selects the TOSLINK digital input
cox Selects the COAXIAL digital input
usb Selects the USB digital input
Status bytes sent from XDS1 V2
The XDS1 V2 sends back 9 Bytes terminated with a <CR> whenever any status changes.
<Byte 0><Byte 1><Byte 2><Byte 3><Byte 4><Byte 5><Byte 6><Byte 7><Byte 8><CR>
Byte 0 Seconds ones in ASCII
Byte 1 Seconds tens in ASCII
Byte 2 Minutes ones in ASCII
Byte 3 Minutes tens in ASCII
Byte 4 Hours ones in ASCII
Command Function
dim Toggles through display brightness settings
try Tray open and close
tr(x) tr followed by a single digit (x) to jump to a particular track. See example.
tr(x) example:
a) Jump to track 5 : tr0<CR>, tr5<CR>
b) Jump to track 12 : tr1<CR>, tr2<CR>
© 2013 EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
XDS1 V2 CD/SACD PLAYER OWNER’S MANUAL