EMM Labs DAC2 AUDIO CONVERTER - Manual (Page 15)

015 Infrared Remote Control
This function toggles the front panel LEDs ON or OFF on the DAC2
When in OFF mode only the LOCK LED would be lit.
These buttons are used to select the digital source input:
• EMM : Selects the EMM Optilink input.
• AES : Selects AES/EBU format PCM digital audio via XLR
• COAX : Selects SPDIF format PCM digital audio via coax/RCA
connector
• TOS : Toggles between TOSLINK SPDIF format PCM audio
from either TOS1 or TOS2 connectors.
• USB : Selects USB PCM audio via USB interface.
• PDAI : Expansion port intended for future use.
Toggles the analog output polarity. Polarity inversion is performed
in the digital domain.
Mutes the outputs.
DAC:
INPUT:
POLARITY:
MUTE:
Infrared Remote Control
The remote control provides combined functions for both the DAC2 and
EMM Labs transport. The functions that are relevant to the DAC2:
© 2010 EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
DAC2 AUDIO CONVERTER OWNER’S MANUAL