EMM Labs CDSD DISC TRANSPORT - Manual (Page 12)

CDSD User Manual
Status info from CDSD
The CDSD sends back 10 Bytes terminated with a <CR> whenever any status changes.
Byte 0 Byte 1 Byte 9 <CR>
Byte 0 Seconds ones in ASCII
Byte 1 Seconds tens in ASCII
Byte 2 Minutes ones in ASCII
Byte 3 Minutes tens in ASCII
Byte 4 Hours ones in ASCII
Byte 5 Track number ones in ASCII
Byte 6 Track number tens in ASCII
Byte 7 bit 0 1 when “Reading” indicator is on (front panel)
bit 1 1 when “Repeat Track” indicator is on( front panel)
bit 2 1 when “Repeat All” indicator is on (front panel)
bit 3 1 when “CD PCM 2HC” indicator is on (front panel)
bit 4 1 when “SACD 2CH” indicator is on (front panel)
bit 5 1 when “SACD MCH” indicator is on (front panel)
bit 6 1 when MP3 disc is selected
bit 7 1 when DVD disc is selected (DVD-V or DVD-A)
Byte 8 bit 0 reserved
bit 1 1 when front panel display is off
bit 2 1 when CDSD in Standby mode
bit 3 1 when “No Disc” indicator is on (front panel)
bit 4 1 when internal clock selected
bit 5 1 when optical clock selected
bit 6 1 when in pause
bit 7 1 when clock is locked
Byte 9 <CR> (x0D)
12