ENMET GSM-60 - Manual (Page 22)

GSM-60 ENMET Corporation
19
Example: Set Alarms Flow Chart
Displays are examples of Alarms
Λ -
Indicates alarm triggered on increasing value of reading
v
- Indicates alarm triggered on decreasing value of reading
L-
Indicates alarm is set for latching
NO
L-
Indicates alarm is set for non-latching
STD – Indicates alarm in standard setting, can be set in latched or non-latched mode
DIFF – Indicates alarm in differential setting, instrument will stay in alarm beyond the alarm set point by the differential value
See Section 4.2 Table 3 for factory alarm set points.
S
O
S
O
S
Alarm 2 -
Select: XX
MAINTENANCE MENU
Set Alarm2
Changes character indicated by underscore cursor
Locks underscored character and moves cursor to next
O Press O PTION until the channel to be Set is displayed
Alarm 2
V L 0 000
O = Press Option
S = Press Select
O
S
S MAINTENANCE MENU
Set Alarm1
Alarm 1 -
Select: XX
O Press O PTION until the channel to be Set is displayed
STD
Alarm 1
O
S
Toggles status between Standard and D IFF
Locks selection
S TD
S
Alarm 1 DIFF BAND
000
Λ L–010
Alarm 1
O
S
Changes character indicated
by underscore cursor
Locks underscored character and
moves cursor to next digit
DIFF S
O
S
Changes character indicated by
underscore cursor
Locks underscored character and
moves cursor to next digit
Λ
Alarm 1
O
S
Toggles status between
Λ
increasing trigger and v decreasing trigger
Locks selection
S
Λ ❚
L
Alarm 1
O
S
Toggles status between
Latching and Non Latching
Locks selection
Alarm 1
Λ DIFF 000
O
S
Changes character indicated by
underscore cursor
Locks underscored character and
moves cursor to next digit