ENMET MX-2100 - Manual (Page 21)

MX2100 ENMET Corporation
19
4.6 Replacement Part Numbers
ENMET replacement part numbers: Sensors – Instrument can hold at the same time:
1 – Combustible Sensor (-E), 1 – Large Sensor (-B) and up to 2 – Small Sensors (-S)
Description Part Number
Small Sensor for Carbon monoxide, CO 02613-1200-S (3)
Small Sensor for Hydrogen sulfide, H2S 02613-0200-S (3)
Small Sensor for Oxygen, O2 02613-1100-S
Large Sensor for Oxygen, O2 extended life 02613-1100-B (3)
Combustible Sensor for LEL 02613-001-E (3)
Large Sensor for Carbon dioxide, CO2 02613-1350-B
Large Sensor for Carbon monoxide/Hydrogen sulfide, CO/H2S 02613-2200-B
Large Sensor for Sulfur dioxide, SO2 02613-0500-B
Small Sensor for Ammonia, NH3 02613-2400-S
Small Sensor for Hydrogen, H2 02613-1500-S
Small Sensor for Chlorine, Cl2 02613-0100-S (1)
Small Sensor for Hydrogen cyanide, HCN 02613-0300-S
Small Sensor for Hydrogen chloride, HCl 02613-0400-S (1)
Small Sensor for Hydrogen fluoride, HF 02613-0700-S (2)
Small Sensor for Ozone, O3 02613-0800-S (2)
Small Sensor for Nitrogen dioxide, NO2 02613-1700-S
Small Sensor for Nitric oxide, NO 02613-1750-S
Small Sensor for Arsine, AsH3 02613-4001-S (1)
Small Sensor for Silane, SiH4 02613-4003-S
Note : (1) For best performance, it is recommended that a sample pump be used for monitoring these gases
(2) A sample pump is required for monitoring these gases
(3) these are the replacement sensors for the standard instrument package P/N 02610-000
Warranty for the instrument package, including CO, H2S, LEL and O2 (-1100-B) sensors is 18 months from date of shipment.
Warranty for all other sensor and accessories is 12 months from date of shipment.
ENMET replacement part numbers: Calibration equipment & replacement parts
Description Part Number
Charger Interface (one supplied with instrument) 02612-002
Calibration Cover (one supplied with instrument) 02612-003
Gas Regulator Assembly for 34 liter cylinder 02506-002
Gas Regulator Assembly for 17 liter cylinder 02506-004
Gas Regulator Assembly, Flow Demand, for 17 liter cylinder 03510-001
Gas Regulator Assembly, Flow Demand, for 34 liter cylinder 03510-002
Calibration Equipment Case, small 73083-000
Calibration Equipment Case, large 73083-002
Instrument Manual 80006-002
Power Supply 110 V AC 67051-046
Power Supply 220 V AC 67051-047
Battery Pack, NimH 02613-002
ENMET replacement part numbers: MX-2100 Accessories
Description Part Number
Protective Cover with Harness 02612-005
Protective Cover without Harness 02612-006
Sampling Pump (
Also order p/n 03700-018 wand probe or p/n 03700-031 hose or both) 02612-010
Wand, 22in. probe with 2 ft. hose 03700-018
Hose 20 ft. with connector 03700-031
Hand Aspirator with 12 ft. hose 02602-011
Hand Aspirator with 27 in. probe and 3 ft. hose 02602-010
Transit Case 73083-006
Software Kit, COM2100, with IR/Serial Cable 02612-012
Charger Adapter, 12 V DC 66014-002