ENMET DC Powered Sample Module - Manual (Page 17)

Gas Sampling Unit ENMET Corporation
13
7.0 Warranty 7.0 Warranty
ENMET warrants new instruments to be free from defects in workmanship and material under normal use for a period of
one year from date of shipment from ENMET. The warranty covers both parts and labor excluding instrument calibration
and expendable parts such as calibration gas, filters, batteries, etc... Equipment believed to be defective should be returned
to ENMET within the warranty period (transportation prepaid) for inspection. If the evaluation by ENMET confirms that
the product is defective, it will be repaired or replaced at no charge, within the stated limitations, and returned prepaid to
any location in the United States by the most economical means, e.g. Surface UPS/FedEx Ground. If an expedient means
of transportation is requested during the warranty period, the customer is responsible for the difference between the most
economical means and the expedient mode. ENMET shall not be liable for any loss or damage caused by the improper use
of the product. The purchaser indemnifies and saves harmless the company with respect to any loss or damages that may
arise through the use by the purchaser or others of this equipment.
This warranty is expressly given in lieu of all other warranties, either expressed or implied, including that of
merchantability, and all other obligations or liabilities of ENMET which may arise in connection with this equipment.
ENMET neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other
than that which is set forth herein.
N OTE : When returning an instrument to the factory for service:
§ Be sure to include paperwork.
§ A purchase order, return address and telephone number will assist in the expedient repair and return of your unit.
§ Include any specific instructions.
§ For warranty service, include date of purchase.
§ If you require an estimate, please contact ENMET.
There are Return for Repair Instructions and Form on the last pages of this manual. This Form can be copied or used
as needed.