Eurocom P370EM Scorpius - Manual (Page 37)

System Startup 1 - 5
Quick Start Guide
1
System Startup
1. Remove all packing materials, and place the computer on a stable surface.
2. Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports.
3. Attach the AC/DC adapter to the DC-In jack at the rear of the computer, then plug the AC power cord into an
outlet, and connect the AC power cord to the AC/DC adapter.
4. Use one hand to raise the lid/LCD to a comfortable viewing angle (it is preferable not to exceed 135 degrees); use
the other hand (as illustrated in Figure 1 - 1 below) to support the base of the computer (Note: Never lift the
computer by the lid/LCD).
5. Raise the lid/LCD to a comfortable viewing angle, and press the power button.
Figure 1 - 1 - Computer with AC/DC Adapter Plugged-In/Opening the Lid/LCD

Shutdown
Note that you should always shut your computer down by choosing the
Shut Down command from the Start menu in Windows 7. This will help
prevent hard disk or system problems.

NVIDIA® SLI or AMD™ CrossfireX Multi GPU Configuration & Power
Note that where two video adapters are installed in an SLI or a Cross-
fire configuration, dual power adapters connected to a power con-
verter box are required to power the system (see pages
C - 15 & D - 17 ).
Single video adapter configurations only require a single power adapter.
135
°