Eurocom Panther 5D - Manual (Page 22)

16
English
Video Features
You can switch display devices, and configure display op-
tions, from the Display control panel in Windows and/or
the NVIDIA Control Panel as long as the video driver is
installed.
To access Display control panel in Windows:
1. Click Start, and click Control Panel (or point to Settings and
click Control Panel).
2. Click Display (icon) - in the Appearances and
Personalization category.
3. Click Adjust Screen Resolution/Adjust resolution.
OR
4. Alternatively you can right-click the desktop and select Screen
resolution.
5. Use the dropbox to select the screen resolution.
6. Click Advanced settings.
To access the NVIDIA Control Panel:
1. Click Start, and click Control Panel (or point to Settings and
click Control Panel).
2. Click NVIDIA Control Panel (icon) - in the Appearances and
Personalization category.
OR
3. Right-click the desktop and select NVIDIA Control Panel from
the menu.
Display Devices
Besides the built-in LCD, you can also use an external
VGA monitor (CRT)/external Flat Panel Display or TV
(connected to the DVI-Out port/HDMI-Out port/Display-
Port) as your display device.
SLI Multi GPU Configuration
This computer features an NVIDIA Scalable Link Inter-
face (SLI) that improves graphic quality and performance
by combining dual NVIDIA GPUs (two video cards are
required) in a single system. To enable/disable SLI Con-
figuration:
1. Go to the NVIDIA Control Panel.
2. Click “+” next to 3D Settings if its sub-items are not shown and
then click Set SLI Configuration.
Figure 9 - Set SLI Configuration
3. Click “Enable SLI technology (recommended)”.
4. Click to “Select the display to view the SLI rendered content
on.” (only a single display may be used).
5. Click Apply and Yes to restart the computer.