Eurocom Panther 5D - Manual (Page 26)

20
English
Audio Features
You can configure the audio options on your computer
from the Sound
control panel in Windows, or from the
Realtek HD Audio Manager / icon in the notifica-
tion area/control panel (right-click the notification area
icon
to bring up an audio menu). The volume may also
be adjusted by means of the Fn + F5/F6 key combination.
Audio Notes (Fn + 5)
This computer features the Fn + 5 key combination to tog-
gle between standard audio and enhanced audio. Note the
following which applies to software mode audio configu-
ration through the computer’s internal speakers only (this
does not apply to surround sound when configured
through external Quadrophonic, 5.1 or 7.1 speaker sys-
tems):
• When the Speaker Configuration in Realtek HD Audio
Manager is set to Stereo, you can use the Fn + 5 key com-
bination to help increase the volume through the speakers.
• When the Speaker Configuration in Realtek HD Audio
Manager is set to Quadrophonic, 5.1/7.1 Speaker, the
best audio configuration will be obtained with the combi-
nation of the Speaker Configuration set to Quadro-
phonic, 5.1/7.1 Speaker, and the THX TruStudio AP
turned ON.
Note that the Fn + 5 key combination is a toggle so you
will need to press the key combination to test if the affect
is applied or not.
Audio Setup for HDMI
HDMI supports video and audio signals. In some cases it
will be necessary to go to the Sound control panel and
manually configure the HDMI audio output.
1. Click Start, and click Control Panel (or point to Settings and
click Control Panel).
2. Click Sound (Hardware and Sound).
3. Click Playback (tab).
4. The playback device will be selected.
5. In some cases you may need to select the audio device and
click Set Default (button).
6. Double-click the device to access the control panel tabs.
7. Adjust the HDMI settings from the control panel tabs.
8. Click OK to close the Sound control panel.
Figure 15
Sound
Playback
Options