Eurocom Uno 3 - Manual (Page 33)

Tilting the LCD Screen 1 - 7
Quick Start Guide
1
2. Apply pressure with one hand at the top (at point ) of the computer (while holding on to the side with the other
hand) to carefully push the LCD screen down in order to tilt it to the appropriate viewing angle (up to 50
degrees from the vertical position).
3. Use one hand at the top of the computer (while holding on to the side with the other hand) to move the computer
back to the original position.
Figure 1 - 4 - LCD Screen Tilt
3
3
Apply pressure from the top of the
screen to adjust the stand outwards
(up to 50° from the vertical position).

DVD Operation
Note that although the comput-
er may be tilted up to an angle
of 50 degrees from the vertical
position, the DVD-ROM drive
will only work (i.e continue to
spin and read DVDs) up until an
angle of around 35 degrees
from the vertical position.
If you have any problems with
the system reading DVDs, ad-
just the tilt angle accordingly.
50°
50°