Eurocom Uno 3 - Manual (Page 93)

BIOS Utilities
Advanced Menu 5 - 9
5
Boot Logo (Advanced Menu)
Use this menu item to enable/disable the Boot Logo screen at system startup. If you
disable the Boot Logo you will not see the F2 Enter Setup or F7 Boot Options
prompts on the screen, however you can still press these keys, while the boot screen
is displayed, to perform the Enter Setup or Boot Option functions.
Power On Boot Beep (Advanced Menu)
Use this menu item to enable/disable the beep as the computer starts up.
Battery Low Alarm Beep (Advanced Menu)
Use this menu item to enable/disable the battery low alarm beep.
Super IO Configuration (Advanced Menu)
Use this menu to enable/disable and configure the serial (RS-232) ports to your re-
quirements. Change Settings allows you to change the IO and IRQ settings, and De-
vice Mode allows you to set the ports to normal or high speed modes.