Eurocom M560A DIVINE - Manual (Page 144)

ATI Video Driver Controls
B - 4 Display Devices
B
Display Devices
Besides the built-in LCD, you can also use an external monitor/flat panel dis-
play or TV/HDTV as your display device. The following are the display op-
tions:
1. The built-in LCD.
2. An external monitor connected to the DVI-Out port (may require DVI to VGA
converter).
3. A flat panel display connected to the DVI-Out port (may require DVI to VGA
converter).
4. A TV/HDTV (HDTV requires an HDTV converter) connected to the S-Video-
Out port.

Theater Mode
Theater Mode can be
enabled by clicking
Theater Mode Op-
tions (button) in the
Overlay tab from the
ATI Mobility Radeon
Properties. (see
Fig-
ure B - 2 ). Theater
Mode enables you to
display video playback
in full screen on a sec-
ondary monitor.
Theater Mode is not
supported if you have
the TV Tuner module
installed.

Monitor and TV Tuner
If you are connecting both a monitor/flat panel display to the DVI-Out port, and a
cable/aerial to the optional TV Tuner module, make sure you attach the cable/
aerial to the TV Tuner first, then the monitor.