Eurocom M560A DIVINE - Manual (Page 94)

BIOS Utilities
5 - 14 Boot Menu
5
Configuring the Network Boot Protocol
Enable the Giga LAN PXE OPROM option from the Advanced >Advanced
Chipset Control menu, and then configure the settings at startup. When you
see the message pictured
, press and hold the Shift and F10 keys to get to
the Boot Agent Configuration Menu . Save the settings to automatically
boot from the network at startup.
Figure 5 - 6
Boot Agent Menu
Realtek RTL8110S/8169S Gigabit Boot Agent
Press Shift-F10 to configure .........
Realtek RTL8110S/8169S Gigabit Boot Agent
Configuration Menu v1.50
Network Boot Protocol PXE
Boot Order PnP/BEV(BBS)
Show Config Message Enable
Show Message Time 3 Seconds
PXE
Boot ordered by BBS BIOS, if BBS BIOS present
<Esc> <Space> <Enter> <F4>
Quit Change Value Next Option Save/Quit
1
2

Enabling Network
Boot
Go to the Advanced >
Advanced Chipset
Control menu to en-
able the Giga LAN
PXE OPROM option.
Save the changes and
exit.
At startup, press and
hold the Shift and F10
keys.
Configure the network
protocol.
Save the settings to
automatically boot
from the network.
1
2