Eurocom M660SRU Milano-X - Manual (Page 21)

Concise User’s Guide
Hot-Key Buttons - 15
English
Application Quick Buttons
Note that the Quick Button driver (QButton) is designed
to allow use of the Hot-Key buttons
as application
quick buttons in absence of the optional PC camera (only
install the Quick Button driver if the PC Camera is
not installed). You will need to install the quick button
utility to enable the functions.
The application quick buttons give instant access to user-
defined applications, with one quick button press. To
configure a program to open when the application quick
buttons
(see Table 4, on page 14 ) are pressed fol-
low the instructions below. The application quick but-
tons will function as long as the program is running (the
icon
will appear in the taskbar). If the program is not
running you will need to restart the computer.
1. Press a button or right-click the icon in the
taskbar.
2. Select Setup from the menu, scroll to AP1/2/3 (or just
Application1 for Model C computers) and select
Custom.
3. An Open dialog box will appear on the screen.
4. Browse to the directory where the desired application.exe
program exists (see below).
5. Double-Click on the program file or choose Open.
Figure 5 - Application Quick Button Configuration
Screens

Application.exe
You will need to locate the actual application exe-
cutable (.exe) file, not just the shortcut. To find the
application right-click its shortcut on the desktop
and click Properties. Click the shortcut (tab) and
see where the executable file is located by clicking
the Open File Location (button).
Models A & B
Model C