EXFO FTB-610 Wideband Copper Test Module - Manual (Page 287)

Impulse Tests
Copper Test 279
Impulse Scope Test
Setting Threshold Values
The Threshold page allows you to set the Impulse Scope Threshold for
the test.
To access the Threshold page:
1. From the Copper main menu Test Groups, select Impulse test
.
2. From the Tests menu, select Impulse Scope test.
3. Tap Edit Thresholds button to open the Threshold page.
4. Set the threshold as required.
5. Tap Close to confirm and exit the page.
The following parameters are displayed:

The Voltage Detection Level allows you to set the test threshold in
either V or mV. The threshold can be changed when the test is running
but will be applied to the next trigger event.

Power Detection Level is read only, allowing you to view the test
threshold limit.