EXFO FTB-7000 OTDR for FTB-200 v2 - Manual (Page 86)

Testing Fibers in Template Mode
72 FTB-7000 Series
Acquiring Traces in Template Mode
6. Once the reference update is complete (or if you did not select the
reference update), the application automatically switches to Template
mode. New events will be managed according to the option you
selected at step 3c. Perform acquisitions in Template mode as follows:
6a. Press Start or from the keypad.
If the first connector check feature is enabled, a message will
appear if there is a problem with the injection level (see Enabling
or Disabling the First Connector Check on page 28).
All traces will automatically be acquired and analyzed, and the
events will be identified.
6b. The application will prompt you if new events are found.