EXFO MaxTester Series - Manual (Page 5)

P/N: 1064921 November, 2013 5/8
9. Using a screwdriver, remove the two screws securing the retaining
plate of the battery in place.
10. Remove the retaining plate so that you can see the battery.
11. Disconnect the battery cable from the unit by pulling on its connector.
Note: To simplify the illustration, the battery cable does not appear in full
between its connector and the battery itself.
C
AUTION
Be careful not to touch any component inside the unit when you
disconnect the battery cable.
Screws securing the
retaining plate
Battery retaining plate
(shown in grey)
Battery cable connector
(shown in grey)
Battery
Battery cable
(only the ends of the cable are shown)