EXFO MaxTester Series - Manual (Page 6)

P/N: 1064921 November, 2013 6/8
12. Hold the battery by its sides and pull it up carefully.
13. Place the new battery into your unit so that its cable is on the left, and
on the lower part of the battery casing as shown below.
14. Connect the battery cable to the unit by pushing its connector in place.
I
MPORTANT
Wait at least 30 seconds before connecting the new battery. This
will ensure that you unit detects it properly.
Battery cable
Battery cable connector
(shown in grey)
Battery
Battery cable
(only the ends of the cable are shown)