EXFO OTDR 2 - Manual (Page 29)

Preparing Your OTDR for a Test
OTDR 21
Naming Trace Files Automatically
4. If you want to increment automatically the cable ID, the fiber ID or the
location (A and/or B), proceeds as follows:
4a. Tap the Increment button.
4b. In the Increment window, select the Auto Increment check box
corresponding to the identifier you want to increment.
4c. Enter the start, stop and increment values as desired.
Note: To decrement values, the start number must be higher than the stop
number.
4d. Choose the type of format in the list.
4e. Tap OK to return to the Identification window.