EXFO OTDR 2 - Manual (Page 92)

Analyzing the Results Manually
84 OTDR
Using Markers
To move a marker with the arrow buttons:
1. From the Measure tab, tap the marker buttons to select the desired
markers.
2. Once the appropriate markers are selected, use the right and left arrow
buttons to move the markers along the trace.
Note: If you select more than one marker, they will move as a block.
To bring back a marker to the visible area:
1. Ensure that only the marker that corresponds to the one that you want
to retrieve is selected.
2. Use the left and right arrows to move the marker.
Marker not selected
Marker selected
Arrow Arrow