Source[1..n]:power:state – EXFO FLS-2200 Broadband Source User Manual
Page 153
IEEE 488.2 and Specific Command Reference
Broadband Source
145
Product-Specific Commands—Description
:SOURce[1..n]:POWer:STATe?
Description
This query returns a value indicating the state of
the optical source (on or off).
*RST sets the optical source to OFF.
Syntax
:SOURce[1..n]:POWer:STATe?
Parameter(s)
None
Response Syntax
<PowerState>
Response(s)
PowerState:
The response data syntax for <PowerState> is
defined as a <NR1 NUMERIC RESPONSE DATA>
element.
The <PowerState> response corresponds to the
state of the source power.
0- The optical source is off.
1- The optical source is on.
Example(s)
SOUR:POW:STAT OFF
SOUR:POW:STAT?
Notes
You can specify the desired SLED. In SOURce
[1..n], n corresponds to the total number of
SLEDs your unit contains.
See Also
SOURce[1..n]:POWer:STATe