EXFO IQS-2400 WDM Laser Source for IQS-500/600 - Manual (Page 136)

SCPI Command Reference
130 IQS-2400
Product-Specific Commands—Description
:SOURce[1..n]:PULM:LIMit:DEPTh:
HIGH?
Description This query returns the maximum depth at which
the dither modulation signal can be set with the
SOURce[1..n]:PULM:INTernal:DEPTh command.
*RST has no effect on this command.
Syntax :SOURce[1..n]:PULM:LIMit:DEPTh:HIGH?
Parameter(s) None
Response Syntax <HighLimit>
Response(s) HighLimit:
The response data syntax for <HighLimit> is
defined as a <NR3 NUMERIC RESPONSE DATA>
element.
The <HighLimit> response is the maximum
depth at which the dither modulation signal can
be set in amperes.
Example(s) SOUR:PULM:LIM:DEPT:HIGH? Returns
5.000000E-003
Notes To set the dither modulation signal depth, use the
command SOURce[1..n]:PULM:INTernal:DEPTh.
See Also SOURce[1..n]:PULM:INTernal:DEPTh
SOURce[1..n]:PULM:INTernal:DEPTh?
SOURce[1..n]:PULM:LIMit:DEPTh:LOW?
SOURce[1..n]:PULM:LIMit:DEPTh:STEP?