EXFO IQS-2400 WDM Laser Source for IQS-500/600 User Manual
Page 55
Controlling Multiple WDM Laser Source Modules
WDM Laser Source
49
Setting Up Multiple IQS-2400 WDM Laser Source Modules
Setting Up Multiple IQS-2400 WDM Laser
Source Modules
Principles that rule the performance of your IQS-2400 WDM Laser Source
are the same whether you control one or many sources at the same time.
For information, see Wavelength and Power Control, General Principles on
page 183.
All parameters that can be set for a single module can also be set for
multiple modules, except for preset values (because source characteristics
may vary from one module to another). In fact, all the settings must be
made with offset values.
Parameter
definition
controls
Single
source mode
Selected
module
indicator
Master control indicator (open lock: on; closed
lock: off). See Protection Software Key on page 5.
Information appears in red during
source stabilization
Source
Status