EXFO IQS-3150 Variable Attenuator for IQS-500/600 User Manual
Page 43
Advertising
Setting Up Your Variable Attenuator
Variable Attenuator
37
Creating a Test Sequence
3. In the Attenuation or the Output Power box (depending on the
selected control mode) enter the attenuation or the output power level
you need.
4. In the Duration box, enter the length of time this level will be applied
before the next step.
5. Click Add (the new step is added at the end of the step list).
OR
Click a step in the Steps list to select it and click Insert (the step is
added before the selected step).
6. To remove a step from the list, click a step in the Steps list to select it
and click Remove.
7. Under Sequence File, click Save As if you want to save that sequence.
In Attenuation mode
In Output Power mode
Advertising