Exo Terra Terrarium Cabinet - Manual

TERRARIUM CABINET
Natural Terrarium Stand
• Stylish & elegant design
• Sturdy and durable construction
• Tempered glass doors with soft touch magnetic
latches
• Flat packed and easy to assemble
• Available in 3 sizes
The elegantly designed Exo Terra
® Terrarium
Cabinets are the perfect complement to the
Exo Terra ® Terrariums. Finished in contemporary
black with smoked tempered glass doors, these
cabinets will show off your terrarium beautifully.
The soft touch magnetic latches and slick metal
hinges of the swing-open door(s) allow for easy
access and give the cabinet a modern designer
look. The integrated storage cabinet allows you to
keep any unsightly live food or other accessories
out of sight, while the external shelf creates a handy
display area for books or all sorts of miscellaneous
items. The Exo Terra ® Terrarium Cabinets are flat
packed for convenience and easy to assemble.
Constructed in the UK from FSC certified material
(responsible forest management system), these
durable and sturdy Exo Terra ® cabinets are not only
beneficial to the environment but they create a
stunning reptile set-up in any home setting.
•
PT2706 Exo Terra ® Cabinet 45,4 x 45,4 x
70,5 cm / 17 7/8 x 17 7/8 x 27 3/4 in – Fits the
Exo Terra ® Natural Terrariums Small
• PT2707 – Exo Terra ® Cabinet 60,5 x 46,5 x
70,5cm / 24 1/4 x 18 1/4 x 27 3/4 in – Fits the
Exo Terra ® Natural Terrariums Medium
• PT2708 – Exo Terra ® Cabinet 90,5 x 46,5 x
70,5cm / 36 x 18 1/4 x 27 3/4 in – Fits the
Exo Terra ® Natural Terrariums Large
Assembly Instructions
Unpack all content from the box, and remove
wrapping material from the components.
Tools required: Screwdriver
Assembly: Use a flat, stable surface to assemble the
Exo Terra ® Terrarium Cabinet.
Read the assembly instructions carefully to avoid any
mistakes.
1 Start with panel #3. Attach the magnetic locks (J)
with the black screws (K) using a screwdriver. Insert
the plastic bushings (G) and the 4 cam locks (A) in
the designated holes. Make sure the arrow on the
cam lock (A) points towards the screw holes in the
side of the panel.
2 Side panels #4 & #5: Use screws (P) to attach the
corner brackets (N). Insert the cam screws (B) in the
designated holes.
A
x4
F
x8
J
x2
N
x2
P
x8
K
x8
L
x2
M
x2
G
x4
H
x4
I
x4
B
x4
C
x8
D
x4
E
x6
6
1
#3
#1 #2
3 Now the side panels (#4 & #5) can be attached
to panel #3. Insert the cam screws (B) in the holes
in the side of panel #3. Use screws (P) to attach the
corner brackets (N) to panel #3 and turn the cam
locks (A) with a screwdriver until the cam screws (B)
are secured.
4 Prepare the glass doors #6 and #7: each door has
a smooth glass outside and a rough inside. Stick the
self-adhesive metal glass-protection gasket (I) on
the rough inside of the door, the gaskets should align
with the shorter side of the door. Use two screws
(F) to attach the pivot hinges (H) and make sure the
screws touch the metal glass-protection gasket on
the inside and not the smooth glass outside of the
door. The bush of the pivot hinge should be placed
closest to the pivoting side of the door. Stick the self
adhesive protection foam (L) on the upper corner of
the glass door, opposite the pivot hinge, and secure
the catch plate (M).
5 Insert the plastic bushings (G) in the bottom
panel #2. Then place the bottom panel on the
existing construction. Screw in the four screws (C),
to connect the bottom panel to the side panels,
only halfway. Now you can place the glass door(s)
in the designated holes. Make sure the catch plate
(M) touches the magnetic latch. Fasten the screws
completely and stick the self adhesive felt pads (E)
to the bottom panel (see image).
6 Turn the construction upside down and attach the
upper panel #1 with four screws (C). Place the metal
secure pins (D) in the pin holes. Your Exo Terra ®
Terrarium Cabinet is now ready for use!
Compatible with: Exo Terra ® Natural Terrariums &
Screen Terrariums: Small, Medium and Large
TERRARIUM CABINET
Support pour terrarium en verre
• Design raffiné et élégant
• Construction solide et résistante
• Porte(s) en verre trempé à loquets magnétiques
faciles à ouvrir
• Emballage plat et meuble facile à assembler
• Vendu en 3 formats
D’un design élégant, les Meubles pour terrarium
Exo Terra ® s’agencent parfaitement avec les
terrariums Exo Terra ® . Accentués d’un fini noir au
goût du jour et de portes en verre trempé et fumé,
ces meubles mettront merveilleusement bien en
valeur votre terrarium. En plus d’offrir une allure
stylisée et moderne, les portes pivotantes à loquets
magnétiques sont faciles à ouvrir et leurs charnières
de métal poli permettent d’accéder facilement à
l’intérieur du meuble. De plus, un espace de ran-
gement intérieur permet de dissimuler les aliments
vivants peu esthétiques ou d’autres accessoires.
Par ailleurs, la tablette extérieure offre un endroit
pratique pour disposer livres ou articles divers.
Les Meubles pour terrarium Exo Terra ® sont faciles à
assembler et leur emballage plat est pratique.
Fabriqués en Grande-Bretagne à partir de matériaux
certifiés FSC (Forest Stewardship Council), ces
meubles solides et résistants respectent l’environ-
nement en plus d’offrir aux reptiles un magnifique
habitat, peu importe le décor de votre foyer.
•
Meuble pour terrarium Exo Terra ® , 45,4 x 45,4
x 70,5 cm (17 7/8 x 17 7/8 x 27 3/4 po) (PT2706),
convient au Terrarium en verre Exo Terra ® , petit
• Meuble pour terrarium Exo Terra ® ,
Operating instructions
Mode d’emploi
Aufbauanleitung
Instrucciones de Uso
Gebruiksaanwijzing
Terrarium
Cabinet
PT2708
K x 8
C
D
D
D
C
D
C
D
C
J
G
G
A
A
A
A
2
#4 & #5
B
B P
P
4
#6 and #7
F
F
H
L M
3
#4
#5
#3
P x 2
5
C
C
C
C
E
E
E
E
E
E