EZ-ACCESS PATHWA MODULAR ACCESS SYSTEM - Manual (Page 9)

Page | 9
S I T E E V A L U A T I O N
ENTRY REFERENCE WORKSHEET PROJECT #____________
SECTION 1 – EVALUATOR'S NAME SECTION 2 – END USER NAME
NOTE: All measurements that do not apply to the entry are to be given a value of 0
SECTION 3 – ENTRY DIAGRAM
SECTION 4 – TOTAL RISE DIAGRAM
SECTION 5 - MEASUREMENTS SECTION 6 – CLARIFYING QUESTIONS
WIDTH OF STEPS (or between the hand rail)........ A=
DEPTH OF STEPS ................................................ B=
RISE OF STEPS .................................................... C=
WIDTH OF PORCH (if differs from steps) .............. D=
RISE OF PORCH (if differs form steps) .................. E=
DEPTH OF PORCH ............................................... F=
WIDTH OF DOOR (usable space) ......................... G=
RISE OF EXTERIOR THRESHOLD ....................... H=
RISE OF INTERIOR THRESHOLD ........................ I=
DEPTH OF THRESHOLD ...................................... J=
RISE OF EXTERIOR THRESHOLD H=
INITIAL RISE OF STEPS/PORCH +C or E=
* GRADE VARIATION (if any) + or -
TOTAL RISE =
IS A BRIDGE PLATE REQUIRED? (yes or no)
THE DOOR OPENS (in or out/left or right)
* Any ground variations should be added (decline) or
subtracted (incline) from the total rise.
EZ-ACCESS ® , along with most regulatory agencies, recommends 1-foot of ramp run per 1-inch of rise in height (1:12 ratio). For
example, if a porch and steps have a total rise of 20-inches, a ramp with a 20-foot run would be required. Please note that this does
not include platforms that may be necessary for the ramp system.
© 2007 Homecare Products, Inc. All rights reserved. All text and images contained on this document are proprietary and may not be shared,
modified, distributed, reproduced, or used without the express written permission of EZ-ACCESS
®
.