Warning – Gryphon Antileon Signature Mono User Manual

Page 18

Advertising
background image

OVERHEATING:
When excessive heat is detect-
ed, the thermal sensor will mute
and the amplifier will go in stand-
by mode. Normal operation can
resume when the temperature is
within safe operating limits.

SHORT CIRCUIT:
Special care should be taken at
all times to avoid shorting the
loudspeaker outputs. If a short
circuit should occur, the Antileon
will open an internal (not user-
replacable) fuse. Contact your
dealer/distributor for service.

We are aware that the Antileon is
the choice of the very experi-
enced audiophile, so please
bear with us while we repeat cer-
tain ground rules:

TURN-ON PROCEDURE:
1. Turn on source components,
Turntable, CD Player, etc.)
2. Turn on preamplifier
3. Allow a few moments for com-
ponents to stabilize, (tube equip-
ment may require more time).
4. Turn on power amplifier

TURN-OFF PROCEDURE:
1. Turn off power amplifiers.
2. Turn off rest of the system.
PLEASE
ALWAYS TURN OFF OR MUTE
THE POWER AMPLIFIER
BEFORE CONNECTING OR

DISCONNECTING ANY
CABLES IN THE SYSTEM.
INTERNAL FUSES
Under the small top cover,
behind faceplate.

From left
Fuse # 1

1 A F (spare)

Fuse # 2

1 A F (spare)

Fuse # 3

1 A F

Fuse # 4

200 mA T

Fuses 1 & 2 are only spare fuses
for fuseholder # 3

Fuse # 3 is the protection system
fuse.
Fuse # 4. is the fuse for the AC
power-up system.

Main AC fuse is located on the
back plate.

Replace only with same value
fuses. Be very carefull when
replacing fuses not to drop fuse
inside amplifier.

WARNING

Do not remove cover of amplifier
unless AC cords are removed
from amplifier.

18

Advertising